In operating loudspeaker system which has several speaker
covering different frequency bands, then you naturally have to work with
suitable differential input signals for each loudspeaker. You can duly achieve
this by using a frequency crossover which can split the input signal into
several frequency bands.
Mount you crossover. It can be mounted above or below
anything that does not produce or generates excessive heat
You crossover can be connected in between you EQ and
amplifier
Make connection via TS or XLR jacks accordingly.
Connect the output of your EQ into the input of you crossover
Connect the output of the crossover into the input of the amplifier
Make connection via TS or XLR jacks accordingly.
Connect the output of your EQ into the input of you crossover
Connect the output of the crossover into the input of the amplifier
